Brasil
E.U.A
Clique para fazer sua busca
Clique para visualizar o menu
Ponte amplificadora para sensor U3W Honeywell

Ponte Amplificadora para Sensor

Techno Supply  »  Produtos  »  Honeywell  »  Ponte Amplificadora para Sensor
Ponte Amplificadora para Sensor
Fabricante
Ponte Amplificadora para Sensor
Principais características

Features

• Strain gage sensor amplifier
• 18 Vdc to 32 Vdc supply voltage
• NEMA 4 housing
• Selectable excitation voltages: 3 V or 5 V @ 70 mA
• 4-20 mA analog output
• Increases signal-to-noise ratio in noisy environments
• Effects of voltage drops in excitation sources are eliminated
• Signals may be sent to the data systems from low impedence
sources 

VISÃO GERAL

The Model U3W amplifier supplies a highly regulated bridge
excitation voltage for the transducer and converts the millivolt
signal of the transducer to a 4 mA to 20 mA three-wire current
output signal. The Universal In-line features two selectable excitation
voltages, programmable gain settings, a wide adjustment
range on the zero, and a buffered solid-state shunt cal relay for
quick calibration.  

DETALHES TÉCNICOS

Characteristic / Measure

Number of channels 1
Case material Plastic or painted aluminum
Mounting Use #6 or #8 screws


Environmental Specifications

Characteristic / Measure

Temperature, operating -15 °C to 71 °C [5 °F to 160 °F]
Sealing IP66 or NEMA 4


Transducer Interface

Characteristic / Measure

Transducer type Bridge-based sensor
Transducer excitation 3 Vdc or 5 Vdc @ 70 mA


Amplifier Characteristic

Characteristic / Measure

Supply voltage 18 Vdc to 32 Vdc
Current draw 70 mA
Frequency response (-3 dB) dc: 7000 Hz with 350 ohm bridge
dc: 5000 Hz with 5000 ohm bridge
Rise time (0 % to 90 %)
54 ms with 350 ohm bridge
78 ms with 5000 ohm bridge
Zero adjustment range, coarse ±70 %
Zero adjustment range, fine ±25 %
Span adjustment range 0.5 mV/V to 6.6 mV/V ±25 % fine adjustment
Linearity 0.02 % of full scale
Shunt calibration Solid state relay on board
Signal output 4 mA to 20 mA (three-wire)
Signal-to-noise ratio 65 db
dc power supply rejection
ratio > 110 db

Not RoHS compliant 

DOCUMENTOS
Produtos relacionados
Sensor de torque de esforço de direção
Sensor de torque de esforço de direção
1369
Honeywell
Sensor de torque para roda
Sensor de torque para roda
1246
Honeywell
Sensor de torque
Sensor de torque
2102
Honeywell
FALE CONOSCO
19. 3403 2300
Av. Santo Estevão, 509
Vila Rezende - 13405-249

Piracicaba, SP - Brasil
Techno Supply Importação e Exportação Ltda.
CNPJ 05.505.756/0001-06