Clique para fazer sua busca
Clique para visualizar o menu
Conversor de mídia 10/100 Mbps PoE PoE MCBASIC LFPT b&b electronics

Conversor de mídia 10/100 Mbps PoE

Techno Supply  »  Produtos  »  B&B Electronics  »  Conversor de mídia 10/100 Mbps PoE
Conversor de mídia 10/100 Mbps PoE
Conversor de mídia 10/100 Mbps PoE
Principais características



3 convenient ports - one 100 Mbps fixed fiber uplink port, one 10/100Base-T PoE/PSE port, and one 10/100 Mbps copper port

Supports Jumbo Frames (up to 10240 bytes)

Features configurable PoE reset on Fiber Loss of Signal (LOS)

Supports LFPT, a diagnostic feature that can be enabled to assist the end user in troubleshooting a failed segment

Supports IEEE 802.3af PoE (15.4W) standards


The PoE McBasic LFPT is the perfect solution for network applications that require Power over Ethernet for locations inside buildings where PoE is required to power an Ethernet device. The PoE McBasic LFPT offers three ports - a 100 Mbps fiber uplink for the network connection, one PoE/PSE 10/100Base-T copper port that provides Power over Ethernet, and one 10/100 Mbps copper port to connect a non-PoE unit to the same fiber uplink.


As a fiber-fed media converter, it provides both power (up to 15.4 Watts) and data to a single remote device over standard CAT5, eliminating the need for additional power to the device. The copper ports Auto Negotiate to the connected device’s speed and duplex mode: 10 Mbps or 100 Mbps, and HDX or FDX (including Flow Control). Additionally, the PoE McBasic LFPT supports jumbo frames up to 10240 bytes.


The PoE McBasic’s LFPT small, table-top design and durability makes it ideal for installation anywhere space is limited. Additionally, the PoE McBasic comes with an internal AC power supply. A Link Fault Pass Through DIP Switch is located on the bottom of the unit, to enable for link LED troubleshooting.




IEEE 802.3 10Base-T twisted pair

IEEE 802.3u 100Base-TX twisted pair

IEEE 802.3af Power over Ethernet

IEEE 802.3u Auto-Negotiation


RFC-2475 DiffServ QoS

Plug-and-play operation

Accepts RJ-45, SC and ST connectors

50/125µm or 62.5/125µm multi-mode fiber

9/125µm single-mode fiber

Single-strand fiber and CWDM models

FX and TX Auto Negotiation

AutoCross for MDI/MDIX

MTU: Supports Jumbo Frames up to 10240 bytes

Link Fault Pass Through DIP Switch




Dimensions 1.46”H x 4.76”W x 7.32”D (3.71 cm x 12.09 cm x 18.59 cm)

Shipping Weight 1.3 lbs (0.58 kg)


Input specifications


100-240 ±10% VAC, 50/60Hz, 0.5A to 0.2A


Power Characteristics


Consumes less than 10 Watts (heating) plus PSE power

IEEE802.3af Power to field <15.4 Watts




Operating Temperature +32° to +122° F (0° to +50° C)

Storage Temperature: -40° to +185° F (-40° to +85° C)

Operating Humidity 5% to 95% (non-condensing)

Produtos relacionados
Switch Ethernet gerenciável
Switch Ethernet gerenciável
B&B Electronics
Servidor compacto Ethernet serial
Servidor compacto Ethernet serial
Vlinx VESP211 Series
B&B Electronics
Dispositivo de demarcação óptico gerenciável
Dispositivo de demarcação óptico gerenciável
B&B Electronics
19. 3403 2300
Av. Santo Estevão, 509
Vila Rezende - 13405-249

Piracicaba, SP - Brasil
Techno Supply Importação e Exportação Ltda.
CNPJ 05.505.756/0001-06