Clique para fazer sua busca
Clique para visualizar o menu
10/100 Mbps managed optical demarcation compact CPE device IE-MINIFIBERLINX-II/TELCO

Dispositivo de demarcação óptico gerenciável

Techno Supply  »  Produtos  »  B&B Electronics  »  Dispositivo de demarcação óptico gerenciável
Dispositivo de demarcação óptico gerenciável
Dispositivo de demarcação óptico gerenciável
Principais características

10/100 Mbps managed optical demarcation compact CPE device

Loopback troubleshooting

SNMP Manageable

Power options: AC, DC

Bi-directional Bandwidth control

MTU: Supports over-sized packets up to 1916


Supports passive 802.3ah OAM (Operation, Administration & Management


The compact IE-MiniFiberLinX-II/Telco is one of the most versatile fiber optic NID devices available on the market today. It provides pointto- point fiber optic connections with a unique management tool to monitor the entire link between two locations. IE-MiniFiberLinX-II/Telco was designed to work with -48 VDC power that is compliant with the Bellcore GR-499 specification, supporting the minimum and maximum transient voltages, typically required by transport equipment used in Telco environments. Other key features include; carrier grade remote SNMP management, extra tagging using Q-in-Q, and PoE (Power over Ethernet).

As a copper-to-fiber converter, the IE-MiniFiberLinX-II/Telco supports multiple fiber types including multimode, single-mode, single-strand fiber (SSF), and Course Wavelength Division Multiplexing (CWDM) functionality to increase the capacity of existing fiber. As a remote, CPE device, it can be connected via the fiber segment to an iMcV-FiberLinXII Host module to support Host/Remote management.


Equipped with one 100 Mbps fiber data port, one 10/100 twisted pair port for data and management, as well as an auxiliary port designed to function as a serial port (when used with the included adapter), the IEMiniFiberLinX- II/Telco also offers multiple powering options: AC power (with included adapter), DC (through a 4-terminal power block).



  • Preserves complete end-to-end fiber connection integrity
  • Bi-directional bandwidth control (per port, per direction, per VLAN)
  • Read/write IEEE 802.1Q VLAN-tags
  • Extra Tagging with Q-in-Q mode (802.1p)
  • Supports passive 802.3ah OAM (Operation, Administration & Management)
  • QoS: IEEE 802.1p-based packet prioritization (2 queues [high/low] with 8 levels of priority)
  • VLAN filtering up to 32 values
  • Layer 2 packet switching, store and forward operation
  •  Forwarding rate: 14,881 pps for 10 Mbps; 148,810 pps for 100 Mbps
  • AutoCross for MDI/MDIX
  • Features Auto Negotiation and Selective Advertising
  • Supports Half and Full-Duplex operation
  • MTU: Supports over-sized packets up to 1916 bytes per packet


  • Password Control
  • Multiple Access Levels: User Assigned Accounts & Access Levels


  • SNMP V1 and V2c compatible
  • Includes GUI-based iView² software for remote management and upgrades
  • Monitors far-end (remote) status without a physical presence or separate connection
  • IEEE 802.3x Flow Control
  • Includes DHCP and TFTP clients
  • Supports Telnet
  • Includes loopback test modes (MAC swap)
  • Includes LinkLoss and FiberAlert
  • Remote capabilities with built-in support for UMA (IP-less management)
  • RS-232 (Craft) interface for local management
  • Serial cable for direct connection to a PC’s Serial Port

Ethernet Protocols Supported

  • EEE 802.3i 10Base-T twisted pair
  • IEEE 802.3u 100Base-TX twisted pair
  • IEEE 802.3u 100Base-FX or SX fiber


  • Dimensions 0.83”H x 1.80”W x 3.35”D (2.11 x 4.57 x 8.51 cm)


  • AC Wall Adapter: 100 to 240 VAC ±10% input, 5 VDC output, 2A max.
  • DC Input Voltage: 12 to 48 VDC *, 1 to .02A, 7 to 50 VDC, 1 to 0.1A


  • Operating Temperature
  • +14° to +122° F (-10° to +50° C) AC Adapter
  • -13° to +167° F (-25° to +75° C) DC Adapter
  • -49° to +185° F (-45° to +85° C) DC Telco
  • Storage Temperature -49° to +185° F (-45° to +85° C)
  • Operating Humidity 5 to 95% Non-condensing
Produtos relacionados
Chassi para conversor de mídia Ethernet
Chassi para conversor de mídia Ethernet
B&B Electronics
Switch Ethernet não gerenciável
Switch Ethernet não gerenciável
B&B Electronics
Conversor de mídia T1/E1/J1
Conversor de mídia T1/E1/J1
B&B Electronics
19. 3403 2300
Av. Santo Estevão, 509
Vila Rezende - 13405-249

Piracicaba, SP - Brasil
Techno Supply Importação e Exportação Ltda.
CNPJ 05.505.756/0001-06