Brazil
U.S.A
Click to your search
Click to view the menu
Universal Transmitter; 4116; PR Electronics;

Universal Transmitter

Techno Supply  »  Products  »  PR Electronics  »  Universal Transmitter
Universal Transmitter
Manufacturer
Universal Transmitter
Key features

Input for RTD, TC, Ohm, potentiometer, mA and V
2-wire supply > 16 V
FM-approved for installation in Div. 2
Output for current, voltage and 2 relays
Universal AC or DC supply

OVERVIEW

Programmable via detachable display front (4501), process calibration, signal and relay simulation, password protection, error diagnostics and selection of help text in several languages.

Linearized, electronic temperature measurement with RTD or TC sensor.
Conversion of linear resistance variation to a standard analog current / voltage signal, i.e. from solenoids and butterfly valves or linear movements with attached potentiometer.
Power supply and signal isolator for 2-wire transmitters.
Process control with 2 pairs of potential-free relay contacts and analog output.
Galvanic separation of analog signals and measurement of floating signals.
The 4116 is designed according to strict safety requirements and is therefore suitable for application in SIL 2 installations.

TECHNICAL DETAILS

When 4116 is used in combination with the 4501 display / programming front, all operational parameters can be modified to suit any application. As the 4116 is designed with electronic hardware switches, it is not necessary to open the device for setting of DIP-switches.

A green / red front LED indicates normal operation and malfunction. A yellow LED is ON for each active output relay.

Continuous check of vital stored data for safety reasons.

4-port 2.3 kVAC galvanic isolation.

 

Environmental Conditions

Specifications range -20°C to +60°C

Storage temperature -20°C to +85°C

Calibration temperature 20...28°C

Relative humidity < 95% RH (non-cond.)

Protection degree IP20

 

Mechanical specifications

Dimensions (HxWxD) 109 x 23.5 x 104 mm

Dimensions (HxWxD) w/ 4501 / 4511 109 x 23.5 x 116 / 131 mm

Weight approx. 170 g

Weight incl. 4501 / 4511 (approx.) 185 g / 270 g

Wire size 1 x 2.5 mm2 stranded wire

Screw terminal torque 0.5 Nm

Vibration IEC 60068-2-6 : 2007

Vibration: 2...13.2 Hz ±1 mm

Vibration: 13.2...100 Hz ±0.7 g

 

Common specifications

Supply

Supply voltage, universal 21.6...253 VAC, 50...60 Hz or 19.2...300 VDC

 

Isolation voltage

Isolation voltage, test / working 2.3 kVAC / 250 VAC

 

Response time

Temperature input (0...90%, 100...10%) ≤ 1 s

mA / V input (0...90%, 100...10%) ≤ 400 ms

 

Auxiliary supplies

2-w. supply (term. 44...43) 25...16 VDC / 0...20 mA

Fuse 400 mA SB / 250 VAC

Max. power consumption ≤ 2.5 W

Communications interface Communication enabler 4511 / Programming front 4501

Signal / noise ratio Min. 60 dB (0...100 kHz)

Accuracy Better than 0.1% of selected range

EMC immunity influence < ±0.5% of span

Extended EMC immunity: NAMUR NE 21, A criterion, burst < ±1% of span

 

Input specifications

RTD input

RTD type Pt10, Pt20, Pt50, Pt100, Pt200, Pt250, Pt300, Pt400, Pt500, Pt1000 Ni50, Ni100, Ni120, Ni1000, Cu10, Cu20, Cu50, Cu100

Cable resistance per wire (max.) 50 Ω

Sensor current Nom. 0.2 mA

Effect of sensor cable resistance (3-/4-wire) < 0.002 Ω / Ω

Sensor error detection Yes

Short circuit detection < 15 Ω

Linear resistance input

Linear resistance min....max. 0 Ω...10000 Ω

Potentiometer input

Potentiometer min....max. 10 Ω...100 kΩ

TC input

Thermocouple type B, E, J, K, L, N, R, S, T, U, W3, W5, LR

Cold junction compensation (CJC) via ext. sensor in connector 5910 20...28°C ≤ ±1°C, -20...20°C / 28...70°C ≤ 2°C

CJC via internally mounted sensor ±(2.0°C + 0.4°C * Δt)

Δt = Internal temperature-ambient temperature

Sensor error detection Yes

Sensor error current: When detecting / else Nom. 2 μA / 0 μA

Current input

Measurement range 0...20 mA

Programmable measurement ranges 0...20 and 4...20 mA

Input resistance Nom. 20 Ω + PTC 50 Ω

Sensor error detection: Loop break 4...20 mA Yes

Voltage input

Measurement range 0...12 VDC

Programmable measurement ranges 0/0.2...1, 0/1...5, 0/2...10 VDC

Input resistance Nom. 10 MΩ

 

Output specifications

Current output

Signal range 0...20 mA

Programmable signal ranges 0...20 / 4...20 / 20...0 and 20...4 mA

Load (max.) 20 mA/800 Ω/16 VDC

Load stability ≤0.01% of span / 100 Ω

Sensor error indication 0 / 3.5 / 23 mA / none

NAMUR NE 43 Upscale/Downscale 23 mA / 3.5 mA

Output limitation, on 4...20 and 20...4 mA signals 3.8...20.5 mA

Output limitation, on 0...20 and 20...0 mA signals 0...20.5 mA

Current limit ≤ 28 mA

Voltage output

Signal range 0...10 VDC

Programmable signal ranges 0/0.2...1; 0/1...5 ; 0/2...10; 1...0.2/0; 5...1/0; 10...2/0 V

Load (min.) 500 kΩ

Relay output

Relay functions Setpoint, Window, Sensor error, Latch, Power and Off

Max. voltage 250 VRMS

Max. current 2 AAC or 1 ADC

Max. AC power 500 VA

 

Approvals

EMC 2004/108/EC

LVD 2006/95/EC

FM 3025177

UL UL 508

EAC TR-CU 020/2011

DNV Marine Stand. f. Certific. No. 2.4

SIL Hardware assessed for use in SIL applications

DOCUMENTS
Related products
Universal Uni/Bipolar Signal Transmitter
Universal Uni/Bipolar Signal Transmitter
4104
PR Electronics
 Programmable Transmitter
Programmable Transmitter
5114A
PR Electronics
Inductive Proximity Sensor
Inductive Proximity Sensor
8343
PR Electronics
CONTACT
19. 3403 2300
Av. Santo Estevão, 509
Vila Rezende - 13405-249

Piracicaba, SP - Brazil
Techno Supply Import and Export Ltda.
CNPJ 05.505.756/0001-06