Brazil
U.S.A
Click to your search
Click to view the menu
Programmable Transmitter; 5114A; PR Electronics;

Programmable Transmitter

Techno Supply  »  Products  »  PR Electronics  »   Programmable Transmitter
 Programmable Transmitter
Manufacturer
 Programmable Transmitter
Key features

Input for RTD, TC, mV, linear resistance, mA, and V
3-port 3.75 kVAC galvanic isolation
Current and voltage output
Universal voltage supply
1- and 2-channel versions
Loop supply > 17.1 V

OVERVIEW

The 5114 transmitter can be configured, with or without a power supply, using the PReset software and the Loop Link communications unit.

Jumper selectable inputs for current/voltage or temperature.

Programmable current (0...100 mA) and voltage (0...250 VDC) inputs.

Linearized, electronic temperature measurement.

Conversion of linear resistance variation e.g, from solenoids and butterfly valves or linear movements with attached potentiometer.

17.1 VDC loop and 2.5 VDC potentiometer supplies.

Automatic 4- / 3-wire or programmable 2-wire cable compensation.

Configurable sensor error detection including NAMUR NE43.

TECHNICAL DETAILS

Active or Passive current output and selectable voltage output.

Separation of circuits in PELV/SELV installations.

 

Environmental Conditions

Specifications range -20°C to +60°C

Calibration temperature 20...28°C

Relative humidity < 95% RH (non-cond.)

Protection degree IP20

 

Mechanical specifications

Dimensions (HxWxD) 109 x 23.5 x 130 mm

Weight approx. 225 g

DIN rail type DIN 46277

Wire size 1 x 2.5 mm2 stranded wire

Screw terminal torque 0.5 Nm

 

Common specifications

Supply

Supply voltage, universal 21.6...253 VAC, 50...60 Hz or 19.2...300 VDC

 

Isolation voltage

Isolation voltage, test / working 3.75 kVAC / 250 VAC

 

Response time

Temperature input, programmable (0...90%, 100...10%) 400 ms...60 s

mA / V input (programmable) 250 ms...60 s

 

Auxiliary supplies

2-wire supply (pin 44...42 and 54...52) 28...17.1 VDC / 0...20 mA

Fuse 400 mA SB / 250 VAC

Max. power consumption ≤ 3 W (2 channels)

Internal consumption ≤ 2 W (2 channels)

Communications interface Loop Link

Signal / noise ratio Min. 60 dB (0...100 kHz)

Updating time 115 ms (temperature input) 75 ms (mA / V / mV input)

Signal dynamics, input 22 bit

Signal dynamics, output 16 bit

Auxiliary voltages: Reference voltage 2.5 VDC ±0.5% / 15 mA

EMC immunity influence < ±0.5% of span

Extended EMC immunity: NAMUR NE 21, A criterion, burst < ±1% of span

 

Input specifications

Common input specifications

Max. offset 50% of selected max. value

RTD input

RTD type Pt100, Ni100, lin. R

Cable resistance per wire (max.) 10 Ω

Sensor current Nom. 0.2 mA

Effect of sensor cable resistance (3-/4-wire) < 0.002 Ω / Ω

Sensor error detection Yes

TC input

Thermocouple type B, E, J, K, L, N, R, S, T, U, W3, W5, LR

Cold junction compensation (CJC) < ±1.0°C

Sensor error current Nom. 30 μA

Sensor error detection Yes

Current input

Measurement range 0...100 mA

Min. measurement range (span) 4 mA

Input resistance: Supplied unit Nom. 10 Ω + PTC 10 Ω

Input resistance: Non-supplied unit RSHUNT = ∞, VDROP < 6 V

Voltage input

Measurement range 0...250 VDC -150...+150 mV

Min. measurement range (span) 5 mV

Input resistance Nom. 10 MΩ (≤ 2.5 VDC) Nom. 5 MΩ (> 2.5 VDC)

Nom. 10 MΩ (mV input)

 

Output specifications

Current output

Signal range 0...20 mA

Min. signal range 10 mA

Load (max.) 20 mA/600 Ω/12 VDC

Load stability ≤0.01% of span / 100 Ω

Current limit ≤ 28 mA

Sensor error indication Programmable 0...23 mA

NAMUR NE 43 Upscale/Downscale 23 mA / 3.5 mA

Voltage output

Signal range 0...10 VDC

Min. signal range 500 mV

Load (min.) 500 kΩ

2-wire 4...20 mA output: Signal range 4...20 mA

Load stability, 4…20 mA output ≤ 0.01% of span / 100 Ω

Max. load resistance [Ω] (Vsupply - 3.5) / 0.023 A

Max. external 2-wire supply 29 VDC

Effect of external 2-wire supply voltage variation < 0.005% of span / V

*of span = of the presently selected range

 

Approvals

EMC 2004/108/EC

LVD 2006/95/EC

PELV/SELV IEC 364-4-41 and EN 60742

EAC TR-CU 020/2011

DNV Marine Stand. f. Certific. No. 2.4

DOCUMENTS
Related products
Signal Controller
Signal Controller
2286
PR Electronics
Isolated Converter / Splitter
Isolated Converter / Splitter
3109
PR Electronics
Temperature Converter, Loop-Powered - Isolated
Temperature Converter, Loop-Powered - Isolated
3331
PR Electronics
CONTACT
19. 3403 2300
Av. Santo Estevão, 509
Vila Rezende - 13405-249

Piracicaba, SP - Brazil
Techno Supply Import and Export Ltda.
CNPJ 05.505.756/0001-06