Modular 10/100/1000 mbps ethernet media/mode converter
SNMP manageable
Versatile 4 port device
Converts 10/100/1000Mbps copper to fixed gigbit fiber
Converts 10/100/1000Mbps copper to SFP on some models; SFP can support 100Mbps fiber, 1000Mbps fier or 10/100/1000Mbps, 1000mbps copper
Supports Jumbo Frames (up to 10240 bytes)
Extended temperature
The IE-iMcV-MultiWay is a modular, CPE device providing two fixed 10/100/1000Base-T copper ports and 2 SFP ports. The SFP ports support fiber or copper SFPs. A console port and on-board DIP Switches provide configuration and mode options for the module. The IE-iMcV-MultiWay provides OAM functionality with 802.3ah and 802.1ag support on each port. As an Industrial Ethernet device, it supports an extended temperature range of -40° to +85° C.
There are four distinct DIP Switch-selectable configurations that the IE-iMcV-MultiWay supports:
1+1 Uplink Protection, revertive
1+1 Uplink Protection, non-revertive
A four port gigabit switch
A dual copper to fiber SFP media/mode converter
As a 4-port device, it can be deployed with fiber redundancy (with or without 1+1 uplink protection) and status monitoring with management on all ports via SNMP, which now offers OAM for mission-critical applications. It can also be installed as dual 10/100/1000 Mbps copper to fiber media converter (utilized as two separate converters).
The IE-iMcV-MultiWay supports 10/100/1000 Mbps and 1 Gbps copper and 100 Mbps and 1 Gbps optical SFP modules, to provide greater flexibility in the network environment. The hot-swappable nature of SFPs and the numerous fiber modes and types that are available allow for easy configuration and future upgrading as network demands evolve.
The IE-iMcV-MultiWay offers a full feature set including Auto Negotiation, Selective Advertising, AutoCross (on copper ports), VLANs, loopback testing and OAM. Software updates can be downloaded through TFTP or iView2 (iConfig view).
Technical
IEEE 802.3 10Base-T twisted pairv
IEEE 802.3u 100Base-TX twisted pair
IEEE 802.3ab 1000Base-T twisted pair
IEEE 802.3z 1000Base-LX or SX fiber
Extended temperature range
Plug-and-play operation
Accepts RJ-45 and SFP connectors
50/125µm or 62.5/125µm multi-mode fiber
9/125µm single-mode fiber
Single-strand fiber and CWDM models
FX and TX Auto Negotiation
AutoCross for MDI/MDIX
Layer 2 packet switching, store and forward (forwarding rate: 14,880 pps for 10 Mbps, 148,000 pps for 100 Mbps, 1,480,000 Mbps for 1,000 Mbps)
Jumbo Frames support (up to 10240) at Gigabit speed
Standard Compliance
IEEE 802.3ah
IEEE 802.1ag
IEEE 802.1q VLAN
SFP-MSA SFP standard (September 14, 2000)
SFF-8472 DDMI standard (Revision 1.0)
Mechanical
Dimensions 4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)
Shipping Weight 0.30 lbs (.11 kg)
Environmental
Operating Temperature: -40° F to +185° F (-40° C to +85° C)
Storage Temperature: -67 F to +257° F (-55° C to +125° C)
Operating Humidity 5% to 95% (non-condensing), 0 – 10,000 ft. altitude