Brazil
U.S.A
Click to your search
Click to view the menu
2-Wire transmitter with HART protocol 5335D pr electronics

2-Wire Transmitter with HART Protocol

Techno Supply  »  Products  »  PR Electronics  »  2-Wire Transmitter with HART Protocol
2-Wire Transmitter with HART Protocol
Manufacturer
2-Wire Transmitter with HART Protocol
Key features

RTD, TC, Ohm, or mV input
Extremely high measurement accuracy
HART 5 protocol
Galvanic isolation
For DIN form B sensor head mounting

OVERVIEW

Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor.
Difference or average temperature measurement of 2 resistance or TC sensors.
Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors.
Amplification of a bipolar mV signal to a standard 4...20 mA current signal.
Connection of up to 15 transmitters to a digital 2-wire signal with HART communication.

For DIN form B sensor head mounting.

TECHNICAL DETAILS

Within a few seconds the user can program PR5335D to measure temperatures within all ranges defined by the norms.

The RTD and resistance inputs have cable compensation for 2-, 3- and 4-wire connection.

The 5335D has been designed according to strict safety requirements and is therefore suitable for application in SIL 2 installations.

Continuous check of vital stored data for safety reasons.

Sensor error detection according to the guidelines in NAMUR NE89.

 

Environmental Conditions

Specifications range -40°C to +85°C

Calibration temperature 20...28°C

Relative humidity < 95% RH (non-cond.)

Protection degree (encl./terminal) IP68 / IP00

 

Mechanical specifications

Dimensions Ø 44 x 20.2 mm

Weight approx. 50 g

Wire size 1 x 1.5 mm2 stranded wire

Screw terminal torque 0.4 Nm

Vibration IEC 60068-2-6 : 2007

Vibration: 2...25 Hz ±1.6 mm

Vibration: 25...100 Hz ±4 g

 

Common specifications

Supply

Supply voltage 8.0...30 VDC

 

Isolation voltage

Isolation voltage, test / working 1.5 kVAC / 50 VAC

 

Response time

Response time (programmable) 1...60 s

Warm-up time 30 s

Communications interface Loop Link & HART®

Signal / noise ratio Min. 60 dB

Accuracy Better than 0.05% of selected range

Signal dynamics, input 22 bit

Signal dynamics, output 16 bit

Effect of supply voltage change < 0.005% of span / VDC

EMC immunity influence < ±0.1% of span

Extended EMC immunity: NAMUR NE 21, A criterion, burst < ±1% of span

 

Input specifications

Common input specifications

Max. offset 50% of selected max. value

RTD input

RTD type Pt100, Ni100, lin. R

Cable resistance per wire (max.) 5 Ω (up to 50 Ω per wire is possible with reduced measurement accuracy)

Sensor current Nom. 0.2 mA

Effect of sensor cable resistance (3-/4-wire) < 0.002 Ω / Ω

Sensor error detection Yes

TC input

Thermocouple type B, E, J, K, L, N, R, S, T, U, W3, W5

Cold junction compensation (CJC) < ±1.0°C

Sensor error detection Yes

Sensor error current: When detecting / else Nom. 33 μA / 0 μA

Voltage input

Measurement range -800...+800 mV

Min. measurement range (span) 2.5 mV

Input resistance 10 MΩ

 

Output specifications

Current output

Signal range 4…20 mA

Min. signal range 16 mA

Load resistance ≤ (Vsupply - 8) / 0.023 [Ω]

Load stability ≤0.01% of span / 100 Ω

Sensor error indication Programmable 3.5…23 mA

NAMUR NE 43 Upscale/Downscale 23 mA / 3.5 mA

*of span = of the presently selected range

 

Approvals

EMC 2004/108/EC

ATEX 94/9/EC KEMA 03ATEX1537

IECEx KEM 10.0083X

FM 2D5A7

CSA 1125003

INMETRO NCC 12.0844 X

EAC TR-CU 020/2011

EAC Ex TR-CU 012/2011 RU C-DK.GB08.V.00410

DNV Marine Stand. f. Certific. No. 2.4

SIL Hardware assessed for use in SIL applications

DOCUMENTS
Related products
Pulse Isolator
Pulse Isolator
9202A
PR Electronics
Pulse Isolator
Pulse Isolator
5202B
PR Electronics
Programmable f/I-f/f Converter
Programmable f/I-f/f Converter
5225
PR Electronics
CONTACT
19. 3403 2300
Av. Santo Estevão, 509
Vila Rezende - 13405-249

Piracicaba, SP - Brazil
Techno Supply Import and Export Ltda.
CNPJ 05.505.756/0001-06