Brasil
E.U.A
Clique para fazer sua busca
Clique para visualizar o menu
flush diaphragm pressure transducer a105, honeywell

Flush diaphragm pressure transducer

Techno Supply  »  Produtos  »  Honeywell  »  Flush diaphragm pressure transducer
Categorias
Todos
Marcas
Flush diaphragm pressure transducer
Fabricante
Flush diaphragm pressure transducer
Principais características

Features

• 100 psig to 15000 psig range
• Flush mount design
• No dead volume
• Miniature footprint
• Stainless steel
• CE approved 

VISÃO GERAL

Description

Model A-105 gage pressure transducers are manufactured with
a unitized stainless steel diaphragm. The advantage of this type
of design is that a thin diaphragm and heavy sidewalls are made
from one piece of stainless steel. This unitized diaphragm is rugged,
but at the same time can be made thin enough to measure
low pressures. Available pressure ranges span from 100 psig
to 15,000 psig. These models can be used in corrosive fluid
environments. Model A-105 has welded electrical connectors
as an integral part of the transducer body and recommended
for applications involving rough handling or where an all-welded
stainless steel transducer is required.
All units have four (4) active bonded strain gages arranged in a
Wheatstone-bridge configuration. 

DETALHES TÉCNICOS

Performance Specifications

Characteristic / Measure

Pressure ranges 100, 150, 200, 300, 500, 750, 1000, 1500, 2000, 3000, 5000, 7500, 10000, 15000 psig
Accuracy 0.5 % full scale
Non-linearity and hysteresis ±0.5 % full scale
Non-repeatability ±0.1 % full scale
Output 2 mV/V nominal
Resolution Infinite

 

Environmental Specifications

Characteristic / Measure

Temperature, operating -54 °C to 149 °C [-65 °F to 300 °F]
Temperature, compensated 16 °C to 71 °C [60 °F to 160 °F]
Temperature effect, zero 0.01 % full scale/°F
Temperature effect, span 0.02 % reading/°F

 

Electrical Specifications

Characteristic / Measure

Strained gage type Bonded foil
Excitation (calibration) 5 Vdc
Excitation (acceptable) Up to 5 Vdc or (Vac)
Insulation resistance 5000 mOhm @ 50 Vdc
Bridge resistance 350 ohm
Shunt calibration data Included
Electrical termination (std) PTIH-10-6P or equivalent (hermetic)
Mating connector (not incl.) PT06A-10-6S or equiv. (AA111)

 

Mechanical Specifications

Characteristic / Measure

Media Gases, liquids compatible with wetted parts
Overload, safe 50 % over capacity
Proof pressure 400 % (max. 25 k psi)
Dead volume Flush diaphragm
Wetted parts material 17-4 PH stainless steel
Weight 2 oz
Case material Stainless steel
Installation See Model 355 

DOCUMENTOS
Produtos relacionados
Sensor de torque rotativo com precisão reforçada
Sensor de torque rotativo com precisão reforçada
1804-1807
Honeywell
Célula de Carga - Aço Carbono - 300 a 100.000 lb
Célula de Carga - Aço Carbono - 300 a 100.000 lb
3140-CS
Honeywell
Sensor de torque para roda
Sensor de torque para roda
1246
Honeywell
FALE CONOSCO
19. 3403 2300
Av. Santo Estevão, 509
Vila Rezende - 13405-249

Piracicaba, SP - Brasil
Techno Supply Importação e Exportação Ltda.
CNPJ 05.505.756/0001-06