Clique para fazer sua busca
Clique para visualizar o menu
flush diaphragm pressure transducer a205, honeywell

Flush diaphragm pressure transducer

Techno Supply  »  Produtos  »  Honeywell  »  Flush diaphragm pressure transducer
Flush diaphragm pressure transducer
Flush diaphragm pressure transducer
Principais características


• 100 psig to 10000 psig range
• Flush mount design
• 1/4-18 NPT mounting thread
• Miniature footprint
• Stainless steel
• CE approved 



Models A-205 gage pressure transducers are manufactured with
a unitized stainless steel diaphragm. The advantage of this type
of design is that a thin diaphragm and heavy sidewalls are made
from one piece of stainless steel. This unitized diaphragm is rugged,
but at the same time can be made thin enough to measure
low pressures. Available pressure ranges span from 100 psig
to 10000 psig. These models can be used in corrosive fluid
environments. Model A-205 has welded electrical connectors
as an integral part of the transducer body and recommended
for applications involving rough handling or where an all-welded
stainless steel transducer is required.
All units have four (4) active bonded strain gages arranged in a
Wheatstone-bridge configuration. 


Performance Specifications

Characteristic / Measure

Pressure ranges 100, 150, 200, 300, 500, 750, 1000, 1500, 2000, 3000, 5000, 7500, 10000 psig
Accuracy2 0.5 % full scale
Non-linearity and hysteresis ±0.5 % full scale
Non-repeatability ±0.1 % full scale3
Output 2 mV/V
Resolution Infinite


Environmental Specifications

Characteristic / Measure

Temperature, operating -54 °C to 149 °C [-65 °F to 300 °F]
Temperature, compensated 16 °C to 71 °C [60 °F to 160 °F]
Temperature effect, zero 0.01 % full scale/°F3
Temperature effect, span 0.02 % reading/°F3


Electrical Specifications

Characteristic / Measure

Strained gage type Bonded foil
Excitation (calibration) 5 Vdc
Excitation (acceptable) Up to 5 Vdc or (Vac)
Insulation resistance 5000 mOhm @ 50 Vdc
Bridge resistance 350 ohm
Shunt calibration data Included
Electrical termination (std) PTIH-10-6P or equivalent (hermetic stainless)
Mating connector (not incl.) PT06A-10-6S or equiv. (AA111)


Mechanical Specifications

Characteristic / Measure

Media Gases, liquids compatible with wetted parts
Overload, safe 50 % over capacity
Proof pressure 400 % full scale (max. 20000 psi)
Dead volume Flush diaphragm (consult factory for charged volume)
Wetted parts material 17-4 PH stainless steel
Weight 2 oz
Case material Stainless steel 

Produtos relacionados
Célula de carga Tensão/Compressão
Célula de carga Tensão/Compressão
Minigram Beam Load Cell
Minigram Beam Load Cell
Chave Fim de Curso Ex
Chave Fim de Curso Ex
19. 3403 2300
Av. Santo Estevão, 509
Vila Rezende - 13405-249

Piracicaba, SP - Brasil
Techno Supply Importação e Exportação Ltda.
CNPJ 05.505.756/0001-06