Clique para fazer sua busca
Clique para visualizar o menu
Transdutor de pressão diferencial wet/wet Z Low honeywell

Transdutor de pressão diferencial wet/wet

Techno Supply  »  Produtos  »  Honeywell  »  Transdutor de pressão diferencial wet/wet
Transdutor de pressão diferencial wet/wet
Transdutor de pressão diferencial wet/wet
Principais características


• 0.25 % FS accuracy
• 0.5 psid to 30 psid
• mV/V (standard), 4 mA to 20 mA, 0 Vdc to 5 Vdc, or 0 Vdc
to 10 Vdc output
• Intrinsically safe available (option 2N only)10
• CE approved11 



The Model Z low range wet/wet differential pressure transducer
offers a stainless steel assembly. The Model Z line pressure zero
shift specification can be reduced to less than 0.5 % FS/1000
psi by the use of an internal line pressure sensor and analog
correction circuit. Line pressures are available up to 5000 psig
with safe overload of either side up to the maximum line rating.
The natural resonant frequency is increased with the Model Z
because of a stiffer pressure sensing element.
A variety of standard options are available with the Model Z including
the traditional removable pressure adaptors for cleaning
purposes, alternative pressure ports, internal amplifiers options,
and electrical terminations.  


Performance Specifications

Characteristic / Measure

Pressure ranges ±0.5, 1, 2, 5, 10, 15, 25, 30 psid**
Accuracy ±0.25 % full scale
Linearity ±0.15 % full scale (typical)
Hysteresis ±0.10 % full scale (typical)
Non-repeatability ±0.05 % full scale (typical)
Output (standard) 0.5 psid 1.0 mV/V (nominal)
Output (standard) 1 psid to 4 psid 1.5 mV/V (nominal) 
Output (standard) 5 psid to 30 psid 2.0 mV/V (nominal)
Line pressure 1500 psi
Resolution Infinite


Environmental Specifications

Characteristic / Measure

Temperature, operating -1 °C to 88 °C [30 °F to 190 °F]
Temperature, compensated -1 °C to 54 °C [30 °F to 130 °F]
Temperature, effect,zero ±0.5 % full scale/100 °F
Temperature, effect, pan ±0.5 % reading/100 °F


Electrical Specifications

Characteristic / Measure

Strain gage type Bonded foil
Excitation (calibration) 10 Vdc
Excitation (acceptable) Up to 10 Vdc or ac
Insulation resistance 5000 mOhm @ 50 Vdc max.
Bridge resistance 350 ohm (nominal)
Shunt calibration data Included
Elec. termination (std) Bendix PTIH-10-6P or equivalent
Mating connector (not incl.) Bendix PT06A-10-6S or equiv. (AA111)


Mechanical Specifications

Characteristic / Measure

Media All fluid and gases compatible with
316 stainless steel
Overload-safe 1500 psi
Pressure port 1/8-27 NPT female (2)
Dead volume 0.4 cu. in
Wetted parts material 316 stainless steel
Weight 3.6 kg [8 lb]
Case material Stainless steel 

Produtos relacionados
Chave Fim de Curso Ex
Chave Fim de Curso Ex
Sensor de torque de esforço de direção
Sensor de torque de esforço de direção
Chave Fim de Curso
Chave Fim de Curso
19. 3403 2300
Av. Santo Estevão, 509
Vila Rezende - 13405-249

Piracicaba, SP - Brasil
Techno Supply Importação e Exportação Ltda.
CNPJ 05.505.756/0001-06