Clique para fazer sua busca
Clique para visualizar o menu
Transmissor 2 fios com protocolo HART 2-Wire transmitter with HART protocol 5335A pr electronics

Transmissor 2 Fios com Protocolo HART

Techno Supply  »  Produtos  »  PR Electronics  »  Transmissor 2 Fios com Protocolo HART
Transmissor 2 Fios com Protocolo HART
Transmissor 2 Fios com Protocolo HART
Principais características

RTD, TC, Ohm, or mV input
Extremely high measurement accuracy
HART® 5 protocol
Programmable sensor error value
For DIN form B sensor head mounting


Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor.
Difference or average temperature measurement of 2 resistance or TC sensors.
Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors.
Amplification of a bipolar mV signal to a standard 4...20 mA current signal.
Connection of up to 15 transmitters to a digital 2-wire signal with HART® communication.

For DIN form B sensor head or DIN rail mounting with the PR fitting type 8421.


Within a few seconds the user can program PR5335A to measure temperatures within all ranges defined by the norms.

The RTD and resistance inputs have cable compensation for 2-, 3- and 4-wire connection.

The 5335A has been designed according to strict safety requirements and is therefore suitable for application in SIL 2 installations.

Continuous check of vital stored data for safety reasons.

Sensor error detection according to the guidelines in NAMUR NE89.


Environmental Conditions

Specifications range -40°C to +85°C

Calibration temperature 20...28°C

Relative humidity < 95% RH (non-cond.)

Protection degree (encl./terminal) IP68 / IP00


Mechanical specifications

Dimensions Ø 44 x 20.2 mm

Weight approx. 50 g

Wire size 1 x 1.5 mm2 stranded wire

Screw terminal torque 0.4 Nm

Vibration IEC 60068-2-6 : 2007

Vibration: 2...25 Hz ±1.6 mm

Vibration: 25...100 Hz ±4 g


Common specifications


Supply voltage 8.0...35 VDC


Isolation voltage

Isolation voltage, test / working 1.5 kVAC / 50 VAC


Response time

Response time (programmable) 1...60 s

Warm-up time 30 s

Communications interface Loop Link & HART®

Signal / noise ratio Min. 60 dB

Accuracy Better than 0.05% of selected range

Signal dynamics, input 22 bit

Signal dynamics, output 16 bit

Effect of supply voltage change < 0.005% of span / VDC

EMC immunity influence < ±0.1% of span

Extended EMC immunity: NAMUR NE 21, A criterion, burst < ±1% of span


Input specifications

Common input specifications

Max. offset 50% of selected max. value

RTD input

RTD type Pt100, Ni100, lin. R

Cable resistance per wire (max.) 5 Ω (up to 50 Ω per wire is possible with reduced measurement accuracy)

Sensor current Nom. 0.2 mA

Effect of sensor cable resistance (3-/4-wire) < 0.002 Ω / Ω

Sensor error detection Yes

TC input

Thermocouple type B, E, J, K, L, N, R, S, T, U, W3, W5

Cold junction compensation (CJC) < ±1.0°C

Sensor error detection Yes

Sensor error current: When detecting / else Nom. 33 μA / 0 μA

Voltage input

Measurement range -800...+800 mV

Min. measurement range (span) 2.5 mV

Input resistance 10 MΩ


Output specifications

Current output

Signal range 4…20 mA

Min. signal range 16 mA

Load resistance ≤ (Vsupply - 8) / 0.023 [Ω]

Load stability ≤0.01% of span / 100 Ω

Sensor error indication Programmable 3.5…23 mA

NAMUR NE 43 Upscale/Downscale 23 mA / 3.5 mA

*of span = of the presently selected range



EMC 2004/108/EC

ATEX 94/9/EC KEMA 03ATEX1508 X

IECEx KEM 10.0083X


EAC TR-CU 020/2011

DNV Marine Stand. f. Certific. No. 2.4

SIL Hardware assessed for use in SIL applications

Produtos relacionados
Indicador LED Programável
Indicador LED Programável
PR Electronics
Contador Eletromecânico
Contador Eletromecânico
PR Electronics
Conversor Isolado / Splitter
Conversor Isolado / Splitter
PR Electronics
19. 3403 2300
Av. Santo Estevão, 509
Vila Rezende - 13405-249

Piracicaba, SP - Brasil
Techno Supply Importação e Exportação Ltda.
CNPJ 05.505.756/0001-06