Brasil
E.U.A
Clique para fazer sua busca
Clique para visualizar o menu
Transmissor Profibus PA / Foundation Fieldbus transmitter 5350A

Transmissor Profibus PA / Foundation Fieldbus

Techno Supply  »  Produtos  »  PR Electronics  »  Transmissor Profibus PA / Foundation Fieldbus
Transmissor Profibus PA / Foundation Fieldbus
Fabricante
Transmissor Profibus PA / Foundation Fieldbus
Principais características

PROFIBUS PA ver. 3.0
FOUNDATION Fieldbus ver. ITK 4.6
Automatic switch between protocols
Basic or LAS capability with F.F.
For DIN form B sensor head mounting

VISÃO GERAL

Linearized temperature measurement with RTD or TC sensor.
Difference, average or redundancy temperature measurement with RTD or TC sensor.
Linear resistance, potentiometer and bipolar mV measurement.

For DIN form B sensor head or DIN rail mounting with the PR fitting type 8421.

DETALHES TÉCNICOS

Bus transmitter with both PROFIBUS PA and FOUNDATION Fieldbus communication. A unique switch function ensures automatic shift between the two protocols.

Set-up for PROFIBUS PA can be done via Siemens Simatic® PDM®, ABB Melody / Harmony and Metso DNA software and for FOUNDATION Fieldbus via Emerson DeltaV, Yokogawa CS 1000 / CS 3000, ABB Melody / Harmony and Honeywell Experion software.

The simulation mode function can be activated by way of a magnet.

Polarity-independent bus connection.

24 bit A/D converter ensures high resolution.

PROFIBUS PA function blocks:

2 analog.

FOUNDATION Fieldbus function blocks:

2 analog and 1 PID.

FOUNDATION Fieldbus capability:

Basic or LAS.

 

Environmental Conditions

Specifications range -40°C to +85°C

Calibration temperature 20...28°C

Relative humidity < 95% RH (non-cond.)

Protection degree (encl./terminal) IP68 / IP00

 

Mechanical specifications

Dimensions Ø 44 x 20.2 mm

Weight approx. 55 g

Screw terminal torque 0.4 Nm

Vibration DIN class B, IEC 60068-2-6 and IEC 60068-2-64

Vibration: 2...25 Hz ±1.6 mm

Vibration: 25...100 Hz ±4 g

 

Common specifications

Supply

Supply voltage 9.0...32 VDC

 

Isolation voltage

Test voltage 1.5 kVAC for 60 s

Working voltage 50 VRMS / 75 VDC

 

Response time

Response time (programmable) 1...60 s

Internal consumption < 11 mA

Max. current increase in the event of an error < 7 mA

Warm-up time 30 s

Signal / noise ratio Min. 60 dB

Updating time < 400 ms

Execution time, analog input < 50 ms

Accuracy Better than 0.05% of selected range

Signal dynamics, input 24 bit

EMC immunity influence < ±0.1% of reading

Extended EMC immunity: NAMUR NE 21, A criterion, burst < ±1% of reading

 

Input specifications

RTD input

RTD type Pt25…1000, Ni25…1000, Cu10…1000, lin. R, potentiometer

Cable resistance per wire (max.) 50 Ω

Sensor current Nom. 0.2 mA

Effect of sensor cable resistance (3-/4-wire) < 0.002 Ω / Ω

Sensor error detection Yes

Short circuit detection < 15 Ω

TC input

Thermocouple type B, E, J, K, L, N, R, S, T, U, W3, W5

Cold junction compensation (CJC) < ±0.5°C

Sensor error detection Yes

Sensor error current: When detecting / else Nom. 4 μA / 0 μA

Short circuit detection < 3 mV

Voltage input

Measurement range -800...+800 mV

Input resistance 10 MΩ

 

Output specifications

PROFIBUS PA connection

PROFIBUS PA protocol Profile A&B, ver. 3.0

PROFIBUS PA protocol standard EN 50170 vol. 2

PROFIBUS PA address (at delivery) 126

PROFIBUS PA function blocks 2 analog

FOUNDATION Fieldbus connection

FOUNDATION Fieldbus protocol FF protocol

FOUNDATION Fieldbus protocol standard FF design specifications

FOUNDATION Fieldbus version ITK 4.6

FOUNDATION Fieldbus capability Basic or LAS

FOUNDATION Fieldbus function blocks 2 analog and 1 PID

 

Approvals

EMC 2004/108/EC

ATEX 94/9/EC KEMA 03ATEX1011 X

CSA 1418937

FM 3015609

NEPSI GYJ14.1100U

EAC TR-CU 020/2011

DOCUMENTOS
Produtos relacionados
Spring Clip
Spring Clip
7002
PR Electronics
Solenoid / Alarm Driver
Solenoid / Alarm Driver
9203B
PR Electronics
Transmissor Universal
Transmissor Universal
4116
PR Electronics
FALE CONOSCO
19. 3403 2300
Av. Santo Estevão, 509
Vila Rezende - 13405-249

Piracicaba, SP - Brasil
Techno Supply Importação e Exportação Ltda.
CNPJ 05.505.756/0001-06