Brasil
E.U.A
Clique para fazer sua busca
Clique para visualizar o menu
Ponte amplificadora para sensor uv10 honeywell

Ponte Amplificadora para Sensor

Techno Supply  »  Produtos  »  Honeywell  »  Ponte Amplificadora para Sensor
Ponte Amplificadora para Sensor
Fabricante
Ponte Amplificadora para Sensor
Principais características

Features

• Strain gage sensor amplifier
• ±10 Vdc three-wire output
• 3 V, 5 V, or 10 V excitation voltages @ 70 mA
• 18 Vdc to 32 Vdc supply voltage
• NEMA 4 housing
• Increases signal-to-noise ratio in noisy environments
• Effects of voltage drops in excitation sources are eliminated
• Signals may be sent to the data systems from low impedence
sources 

VISÃO GERAL

Description

The Model UV-10 amplifier supplies a highly regulated bridge
excitation voltage for the transducer and converts the millivolt
signal of the transducer to a ±10 Vdc signal. The Universal Inline
features two selectable exciation voltages, programmable
gain settings, a wide adjustment range on the zero, and a buffered
solid-state shunt cal relay for quick calibration.  

DETALHES TÉCNICOS

Performance Specifications

Characteristic / Measure

Number of channels 1
Case material Plastic or painted aluminum
Mounting Use #6 or #8 screws

 

Environmental Specifications

Characteristic / Measure

Temperature, operating -15 °C to 71 °C [5 °F to 160 °F]
Sealing IP66 or NEMA 4

 

Transducer Interface

Characteristic / Measure

Transducer type Bridge-based sensor
Transducer excitation 3 Vdc, 5 Vdc or 10 Vdc @ 50 mA

 

Amplifier Characteristics

Characteristic / Measure

Supply voltage 18 Vdc to 32 Vdc
Current draw 60 mA

Frequency response (-3 dB)

dc: 7000 Hz with 350 ohm bridge
dc: 5000 Hz with 5000 ohm bridge

Rise time (0 % to 90 %)
54 ms with 350 ohm bridge
78 ms with 5000 ohm bridge
Zero adjustment range, coarse ±30 %
Zero adjustment range, fine ±15 %
Span adjustment range 1 mV/V to 20 mV/V, ±25 % fine
Linearity 0.02 % of full scale
Shunt calibration Solid state relay on board
Output ±10 Vdc
Output current 2.5 mA
Signal-to-noise ratio 65 db
dc power supply rejection ratio > 110 db

Not RoHS compliant 

DOCUMENTOS
Produtos relacionados
Flush diaphragm pressure transducer
Flush diaphragm pressure transducer
A-205
Honeywell
General purpose load cell
General purpose load cell
3140
Honeywell
Micro Chave
Micro Chave
BE
Honeywell
FALE CONOSCO
19. 3403 2300
Av. Santo Estevão, 509
Vila Rezende - 13405-249

Piracicaba, SP - Brasil
Techno Supply Importação e Exportação Ltda.
CNPJ 05.505.756/0001-06