With a 6-ft microchange cable connection, the Model JR digital pressure test gauge with 0.2 % full scale accuracy uses transducer technology and a stainless steel diaphragm for high over pressure protection. The transducer technology provides enhanced accuracy over the entire pressure range. The JR has no moving parts and may provide a long life with fewer re-calibrations. The JR provides high resolution with an easy to read 4½-digit display. There are no operator errors due to interpolation of hash marks or parallax errors. The units can be scaled to read in various engineering units such as InHg, Ft H2 O, etc. The Model JRB provides a 4 mA to 20 mA, two-wire output. The Model JRE provides a 0 Vdc to 5 Vdc output. The Model JRR has two programmable limits and relays with no analog output. The Model JRX provides a 0 Vdc to 5 Vdc output with two programmable limits and relays for process control or alarm indication. The Model JRW is powered by one or two common 9 V alkaline batteries. The Model JRT is powered by a 110 Vac adapter. The Model JRV is powered by an 11 Vdc to 32 Vdc power supply. Each unit has a membrane face with raised buttons and tactile feedback for setup and operation. The high, low, and clear buttons are easily accessible on this front membrane. Zero adjustment and zero offset/tare functions are standard on each unit. Calibration and setup parameters are stored on a memory chip to protect from loss even when power is interrupted. Unauthorized set ups and calibrations are also blocked with internal security. Various combinations of the front panel buttons can be de-activated.